澳门威尼人7983

Home » Products » Brush Tufting Machine » Brush Trimmer
Brush Trimmer

Brush Trimmer

We are a professional brush trimmer manufacturer in China. We offer CNC brush making machine, CNC brush tufting machinery, broom making machine, broom tufting machine, plastic broom making machinery, wooden broom making machinery, and more.

Applications
Brush trimmer WXD-TM200 is used to trim wooden brushes with stainless steel wires or copper wires, so as to keep the wire-end flat.

Blades
The blade is made of imported steel with excellent tenacity, being abrasion-resistant. It could rotate in both clockwise and counterclockwise directions, which is controlled by the switch installed aside. The operator should put nothing on the blade before it starts rotating

Operation
1. Before starting the brush trimmer, please check whether all working parts and guide rails are installed correctly and firmly.
2. On the working table, there are two indispensable guide rails supported by four columns, which are fixed by screws. By twisting those four screws, operator adjusts not only the height between guide rails and tabletop, but also the gap distance between two guide rails. It is forbidden to directly put brush on blade without using guide rails.
3. After switching it on, operator should wait for a moment until the blades start rotating regularly.
4. Operator deposits the brush into the gap between two guide rails, and then slowly pushes it back and forth along the rails one or two times.

Maintenance
1. Operator should keep the machine clean, and often spray the blades with anti-rust agent.
2. If the blades become blunt, please smear the blades with diamond paste, and then switch it on to make the blades rotate in counterclockwise direction for 5 to 10 minutes. Please note that diamond paste should be wiped out thoroughly after grinding.
3. Operator should regularly check each part to see whether there are loose screws or not, please make sure to tighten it if he finds a loose one, so as to avoid any accident.
4. If the machine is always deposited in a humid environment, please check whether there is leakage of electricity around the motor before usage. If operator feels leakage of electricity, please make sure to dry it thoroughly before running, so as to keep safe.

If you have any further question, please do feel free to contact us or leave us a message, we'll be here for you.

Other Products
  • 2-Axis Nailbrush MachineNailbrush machine, 2-Axis is a CNC 2-axis nail brush tufting machine with servo motor, staple-type, of which the general tufting speed is 3.4 holes per second, while the maximum tufting speed is 5 holes per second. You may be interested to see another nail brush making ...
  • 2-Axis Nailbrush Tufting MachineWe are a professional nailbrush tufting machine manufacturer in China. Our main products are CNC brush tufting machinery, brush making machinery, broom making machine, broom tufting machine, plastic broom making ...
  • Trimming BrushWe also offer broom tufting machine, plastic broom making machinery, wooden broom making machinery, CNC machine for making broom, and more.
    Trimming brush is a trimming machine. It is used to trim brush with abrasive filament ...
  • Tufting Wooden BrushTufting wooden brush is a CNC 2-axis tufting machine. It is for making wooden brush with stainless steel wires, of which the maximum tufting speed is 5 holes per second. The wooden bases should be pre-drilled, already with holes. We also have 2-axis 2-head ...